Small Diaphragm Condenser Microphone Box. Do you need a small waterproof box to keep you SDC mic for travel or storage? This SDC MIC BOX will keep you P-84, CEMC-6, KM84’s or other small mics safe and dry when not in use.

This box is lined with soft ‘egg-crate’ foam, has rubber gasket seal, a positive snap-closure and will keep your mics safe on the road!

Interior size:  73mm x 183mm x 38mm (2.85″ x 7.2″ x 1.5″)

Deluxe LDC Shock Mount Rebuild Kit for Peluso Large Diameter Shock Mounts with nickel finish, includes lever arm wrench set and 2 large shock mount elastics.

20′ Heavy Duty 8-Pin Connector Cable.

18′ 7-Pin XLR Cable.

Double reussen shielding with two layers of 100% coverage copper wire. All cable conductors are 100% oxygen free. Ultra-flexible cable jacketing makes our cables supple and easy-to-handle. High-quality 7-pin XLR style connectors provide secure connections.

Vintage Pop Filter for P-49, P-47, 22 47 LE & 22 47 SE microphones.

An NOS 6AU6A vintage vacuum tube, microphone tested for signal and quiet noise floor, for replacement in the Sony C37A and C800g and the Altec 21B  microphones.

Peluso Small Diameter Shock Mount, with nickel finish is a new after-market shock mount designed by Peluso Microphone Lab to fit all small diameter Neumann and Geffel Microphones and other SDC microphones with a diameter of 20mm to 22mm. (Microphone not included)

21 mm diameter compatible Mics Include:
Neumann: KM 53, KM 53a, KM 54, KM 56, KM 64, KM 73, KM 74, KM 76, KM 83, KM 84, KM 86, U 64,
Neumann Gefell: M71s
Peluso: CEMC-6, P-84

C414 Post 3-Pin, Kit includes: Extended post, Large locking nut, 3-pin XLR connector, 3 wires for connection to XLR

C12A or C12B Post 6-Pin, Kit includes: Extended post, Large locking nut, 6-pin XLR connector, 6-pin XLR connector cable end, Wires for connection to XLR

U67/U87 Peluso Shock Mount, Nickel Finish. This is a new after-market shock mount designed by Peluso Microphone Lab to fit a vintage Neumann U-67 or U-87. This mount is also available for any taper body microphone with a maximum diameter of 51mm/46mm (+/-1mm)(upper/lower dims). (Microphone not included)

Replacement Shock Mounts Hardware. Replacement Hardware for Peluso Large Diam. Shock Mounts with nickel finish.

SM2 SM21 SM69 Peluso Shock Mount, Nickel Finish. This is a new after-market shock mount designed by Peluso Microphone Lab to fit a vintage Neumann SM2, SM21 or SM69. This mount is suitable for any microphone body with a diameter of 30-31mm. (Microphone not included)